Hand Sheet Former

    Our this hand sheet former is applicable to research and experiments in papermaking research institutes and paper mills.
    It forms pulp into a sample sheet, then puts the sample sheet on the water extractor for drying and then carries out the inspection of the physical intensity of the sample sheet to appraise the performance of the raw material of pulp and beating process specifications. Its technical indicators conform to the international & China specified standard for papermaking physical inspection equipment.
   This former combines vacuum-sucking & forming, pressing, vacuum-drying into one machine, and all-electric control.

 Diameter of sample sheet: ≤ 200mm
 Vacuum degree of vacuum pump: 0.092-0.098MPa
 Vacuum pressure: about 0.1MPa
 Drying temperature: ≤120℃ 
 Drying time (30-80g/m2 quantitative): 4-6 minutes
 Heating power: 1.5Kw×2
 Vacuum power: 2.2Kw   
 Outline dimensions: 1800mm×710mm×1300mm .
 Working table material: stainless steel (304L) with painting
 Equipped with one standard couch roller (304L) with a weight of 13.3Kg.
 Equipped with a spraying and washing device.
 Weight: 295kg. 

 Sheet-forming and vacuum-drying are combined into one machine;
White water recycling;
Electric pulp-feeding;
Compressed air to even the pulp manual even the pulp drain out the water fast;
Microfiber and thick sample sheet accessories;
Spraying device for cleaning;
Working table is made of stainless steel (#304) then painted.
Flexible suction & presser device inside the drying body the sheet thickness can be 10mm max.;
 Non-oil vacuum pump with self-safeguarding device;
Out-built water source connection outlet easy operation by connect with power supply and water supply the machine can work.

ISO 5269/2 & ISO 5269/3 NBR 14380/99 TAPPI T-205 DIN 54358 ZM V/8/76

NO